Dynaflex Cushioin Top is an acrylic polymer emulsion containing fine rubber particles, designed as a flexible and resilient recreational cushion coating. Dynaflex Cushion Top is designed as a leveling cushion inter-layer when installing the Dynaflex Cushion System for tennis courts and recreational surfaces. Dynaflex Cushion Base should be applied prior to Dynaflex Cushion Top. Dynaflex Cushion Top will level and fill textured surfaces resulting from the larger rubber granules in Dynaflex Cushion Base. Dynaflex Color Coating should be applied as a final layer.

  • Premium Acrylic Cushion Coating

    A flexible and resilient cushion base coating for tennis courts.
  • Specially Formulated

    100% compatible with Dynaflex Acrylic Color Coating.
  • Fast Drying

    Acrylic formula allows for faster drying than asphalt-based coatings.
  • Multi-Layer

    Designed as a cushion coat prior to application of Dynaflex Acrylic Color Coating Finish.
  • No Harmful Solvents

    Can be used indoors as well as outdoors.
Dynaflex Cushion Base

Available Drum or Tote

Product # Product Description
02830 55-Gallon Steel Drum
02828 275-Gallon Tote

Mix Design

As supplied, Dynaflex Cushion Top is a concentrate intended to be mixed with water to form a ready-to-use material. The mixture may consist of up to 20 gallons of water per 55 gallons of Dynaflex Cushion Top concentrate to achieve a heavy, creamy consistency.


The following application procedures are recommended for best results:

  • Each application shall be at a rate of 7-10 square yards per gallon of concentrate per coat. Coverage rates can vary with the texture of the Dynaflex Cushion Base layer.
  • Application must be made when ambient and pavement temperatures are above 50°F.
  • A minimum of three coats is recommended to the minimum total deposition of 0.375 gallon of concentrate per square yard.
  • It is recommended that the area over which the application is made be open to use only after trial shows it to be cured sufficiently.