Dynaflex Cushion Base is an acrylic plymer emulsion containing rubber particles, fabricated as a flexible and resilient cushion coating. Dynaflex Cushion Base is designed as the base layer when installing the Dynaflex Cushion System for recreational surfaces. Dynaflex Cushion Base should be applied prior to Dynaflex Cushion Top, and Dynaflex Color Coating should be applied as the final layer.

  • Premium Acrylic Cushion Coating

    A flexible and resilient cushion base coating for tennis courts.
  • Specially Formulated

    100% compatible with Dynaflex Acrylic Color Coating.
  • Fast Drying

    Acrylic formula allows for faster drying than asphalt-based coatings.
  • Player Comfort

    Creates an energy absorbing court surface to increase comfort and reduce joint stress
  • No Harmful Solvents

    Can be used indoors as well as outdoors.
Dynaflex Cushion Base

Available Drum or Tote

Product # Product Description
02815 55-Gallon Steel Drum
02812 275-Gallon Tote

Mix Design

As supplied, Dynaflex Cushion is a concentrate intended to be mixed with water to form a ready-to-use material. The mixture may consist of up to 20 gallons of water per 55 gallons of Dynaflex Cushion Base concentrate to achieve workablility.

Application

For use over asphalt pavement, the following application procedures are recommended for best service:

  • Each application of the ready-to-use mixture shall be at a rate of 0.125 gallon per square yard per coat based on the concentrate.
  • Coverage rates can vary with age, texture and porosity of the pavement to be sealed and with the method of application.
  • A minimum of three coats is recommended to the minimum total deposition of 0.375 gallon of concentrate per square yard.
  • Depending on the degree of cushioned effect desired, tennis courts require three or more coats of Dynaflex Cushion Base with one or two coats of Dynaflex Cushion Top.