Dynaflex Acrylic Resurfacer is a premium quality, highly pigmented, acrylic emulsion recommended for smoothing and filling texture on asphalt surfaces prior to application of Dynaflex color coating. In addition, it can be used as a finish for any asphalt or concrete surface where a durable black surface is desired.
Fast DryingAllows multiple coats in one working day.
Specially Formulated100% compatible with Dynaflex Acrylic Color Coating.
EconomicalHighly concentrated formula with water and filler addition by user reduces applied cost.
Non-Scuffing100% synthetic will not mark tennis balls or shoes.
VersatileMay be used as final coat if black non-fading surface is desired or as a minor bird bath filler without excessive shrinkage.
Available in Drum or Tote
|Color Choices||5-Gallon Pail||55-Gallon Steel Drum||260-Gallon Tote|
Mix Design(Based on 100 Gallons)
Dynaflex Acrylic Resurfacer is a highly concentrate material intended to be mixed with water and mineral aggregate to form a ready-to-use color. If using as a resurfacer, add half as much water as concentrate and 8-12 lbs. of sand per gallon of Dynaflex Acrylic Resurfacer.
|28 Gallons||440-660 lbs.||103 - 113 Gallons|
If using as a finish coat, reduce the dilution to 0.4 Gallons of water and 5 lbs. of sand per gallon of Dynaflex Acrylic Resurfacer.
Each application of the ready-to-use mixture shall be at a rate of 0.06 to 0.1 gallon of concentrate per square yard per coat. As a finish coat, the consumption would be 0.045 to 0.065 gallon of concentrate per square yard. Coverage rates can vary with the age, texture, and porosity of the pavement to be sealed and with the method of application.