Dynaflex Acrylic Color Coating is a premium quality, highly pigmented, acrylic emulsion that contains high tensile strength geotextile fibers for greater toughness, flexibility and longer service life. Dynaflex is also formulated with a surfactant package which promotes superior adhesion to concrete or asphalt surfaces. Dynaflex contains no asbestos or mercury.
Long LastingPremium acrylic polymer fortified with polyolefin fiber provides up to 50% greater wear, tensile strength and flexibility than typical clay filled acrylic coatings.
Uniform ColorConsistent quality control color matching at the factory assures uniform non-chalking color.
Two-Year Buyer Protection WarrantyAvailable from Dynaflex Licensed Applicators and Neyra Industries, Inc.
LEED Green Building CompliantCustom colors can be formulated to meet "High Albedo Coatings" requirements.
Available in Pail, Drum or Tote
|Color Choices||5-Gallon Pail||55-Gallon Steel Drum||260-Gallon Tote|
|Dark Blue||Per Quote||02219||Per Quote|
Mix Design(Based on 55 Gallons)
Dynaflex is a highly concentrated material intended to be mixed with water and mineral aggregate to form a ready-to-use color.
|22-28 Gallons||300-400 lbs.||90-100 Gallons|
All sand used should be clean, dry, pure silica sand, free of contaminants. Fine sand with an A.F.S. rating of 70 to 100 gives best results.
New construction of recreational surfaces often requires Dynaflex Acrylic Resurfacer prior to color coating. There is also the option of building up an acrylic cushion underlayment with Dynabond, Sport-Mat and SportTop prior to color coating. After the resurfacer or cushion underlayment has been given adequate time to dry thoroughly, Dynaflex texture color coats shall be applied by rubber-bladed squeegee in a minimum of two applications. As a result, on a smooth sand or rubber textured surface, consumption of Dynaflex Acrylic color coating is calculated at a rate of .05 to .1 gallon per square yared per coat or one gallon per 10 to 20 square yards per coat.